|
|
Post by mrdave on Oct 19, 2024 16:11:53 GMT
Using PCUAE and booting into Linux mode doing a 'cat /proc/cpuinfo' I see CPU has only 2 cores, but the C64 Maxi has a 4-core CPU, so 2 cores are disabled at boot.
In effect after sending these commands:
echo 1 >/sys/devices/system/cpu/cpu2/online echo 1 >/sys/devices/system/cpu/cpu3/online
htop shows all 4 CPU cores running.
So perhaps enabling these cores could speed up things on the Maxi when using other PCUAE modes?
|
|
|
|
Post by Wizart on Oct 19, 2024 16:30:00 GMT
i will look at that and activate all cores in PCUAE gr Wizart  |
|
|
|
Post by Wizart on Oct 19, 2024 16:52:17 GMT
fixed it should work ok now its here called PCUAE linux mode v4.5.2 |
|
|
|
Post by Wizart on Oct 19, 2024 16:54:03 GMT
So perhaps enabling these cores could speed up things on the Maxi when using other PCUAE modes?
in most off the Modes is it already done Grtz Wizart |
|
|
|
Post by spannernick on Oct 22, 2024 23:19:16 GMT
It because THEC64 Maxi is based on THEC64 Mini that has a A20 in it that has 2 cores only, the other 2 cores are not needed and I already activated the other 2 cores in PCUAE where it needs it.
|
|
